Larson Electronics LLC Releases 30 KVA Temporary Power Distribution System

World News: . []

KEMP, Texas, April 16, 2018 (GLOBE NEWSWIRE) -- Larson Electronics LLC, a leading industrial lighting company, released a temporary power distribution system that converts 480V AC current into single phase 120V AC and 208V AC 60 Hz. This portable power distribution system makes it safe and easy to tap into 480V AC power and distribute it to a variety of electrical equipment indoors and outdoors where grid power is unavailable, such as aircraft hangars, shows, shipyards and construction sites.

The MGL-60C-30KVA-4X120.20A-1X208.50A-E18 is a mobile temporary transformer that allows operators to power their equipment on converted 480V AC power. This portable power distribution is designed to operate with 480V, three phase, 60hz which it then steps down to three phase 120V AC and 208V AC via a 30K VA transformer. Secondary current is wired to a 120/208V, single phase, 100-amp load center with main breaker for circuit protection. 120/208V line out protection is provided by three 20-amp, 125V, single pole breakers and one 50-amp, 250V, 2 pole breaker. The 120V AC power is then available via four 5-20R 20amp, 125V GFCI protected duplex receptacles and the 208 VAC power is available via one CS8369 50amp, 250V receptacle.

The MGL-60C-30KVA-4X120.20A-1X208.50A-E18 is potted and built to UL 1640 standards with a NEMA 3R rated load center. The transformer, along with the load center/distribution assembly, is mounted to a dolly cart style frame made of powder-coated steel. This stable and durable platform with two run-flat rubber tires provides operators with great mobility throughout the worksite. A center point lift is including so the unit can be easily lifted with cable or chain hooks. A 60' 4/4 SOOW line-in cable is included to connect the substation to a primary 480V primary power supply and a fused disconnect is included for primary line-in protection and to supply primary power to the 30 KVA transformer.

"The MGL-60C-30KVA-4X120.20A-1X208.50A-E18 provides operators with the ability to tap safely into 480 voltage to power equipment independently from the work area," said Rob Bresnahan, CEO of Larson Electronics LLC. "We can also modify this assembly to meet operator needs up to 150 KVA and change the cart to a trailer or skid mounted configuration."

Photos accompanying this announcement are available at

More news and information about Larson Electronics, LLC

Published By:

Globe Newswire: 21:15 GMT Monday 16th April 2018

Published: .

Search for other references to "larson" on SPi News

Previous StoryNext Story

SPi News is published by Sector Publishing Intelligence Ltd.
© Sector Publishing Intelligence Ltd 2018. [Admin Only]
Sector Publishing Intelligence Ltd.
Ground Floor Offices, Little Keep Gate, Barrack Road, Dorchester, Dorset DT1 1AH
Registered in England and Wales number 0751938.
Privacy Policy | Terms and Conditions | Contact Us

Advertising on SPi News: Information For Advertisers