MIPI Alliance Opens Access to its Debug and Trace Specifications

World News: . []

The MIPI Alliance, an international organization that develops interface specifications for mobile and mobile-influenced industries, today announced that its LINK  are now publicly available for download.

MIPI debug and trace specifications give device developers a standard, layered set of interfaces and protocols to address debug requirements specific to mobile devices, providing an alternative to using dedicated debug and test equipment.

"Opening up access to MIPI debug and trace specifications will foster a more standardized debug environment, improving development processes and quality in and beyond the mobile device industry," said Joel Huloux, chairman of MIPI Alliance. "In addition to allowing more developers to use the specifications, this step will strengthen the ecosystem, leading to broader interoperability and a richer development environment.”

The nine available specifications include the following:

  • LINK  (MIPI SPP) v2.0, the latest version of the standard communications protocol for debug and test applications, which includes MIPI TinySPP, a style of SneakPeek for low-bandwidth and potentially high-latency interfaces
  • LINK  (MIPI SyS-T), a universal data format for transmitting software debug and trace information
  • LINK  (MIPI NIDnT), a specification that allows the use of functional ports on a device for debug/testing of finished products
  • LINK  (MIPI STP), a base protocol for application-specific trace functions
  • LINK  (MIPI TWP), a protocol enabling multiple source trace streams to be combined into a single trace stream
  • LINK  (MIPI HTI) and LINK  (MIPI PTI), for exporting trace data
  • LINK  (MIPI GbD USB) and LINK  (MIPI GbD IPS), techniques for using the SPP and TWP protocols over USB and IP sockets

In addition, LINK  are publicly available to help streamline the software integration of components in mobile devices, as well as in mobile-connected designs targeted for IoT, automotive and other applications. These specifications allow developers to take a common software approach when loading drivers for different types of components from different vendors.

In conjunction with the public release of the nine debug and trace specifications, MIPI announced the availability of MIPI SPP v2.0. The specification introduces MIPI TinySPP, which is optimized for use with low-bandwidth and potentially high-latency interfaces such as LINK  , the high-performance, low-power interface for links between sensors and application processors.

"The IoT explosion is creating demand for millions of small, low-powered devices, such as sensors, in mobile and mobile-influenced systems," said Enrico Carrieri, chair of the MIPI Debug Working Group and Principal Engineer in Debug Architecture with Intel Corporation. "With MIPI SPP v2.0, TinySPP extends SneakPeek so it can be used for efficient debugging of these devices."

MIPI SPP simplifies mobile device development by replacing the use of dedicated debug interfaces, such as JTAG, between a debug and test system (DTS) and a target system (TS). It abstracts the interface and uses the familiar mechanism of address-mapped read-and-write transactions to access components of the TS via memory agents. SPP can be used by multiple debug and test applications.

TinySPP introduces features that reduce the data transfer and overhead requirements for debug and test communications. These include a shorter minimum packet length of 4 bytes instead of 16 bytes, a smaller transaction byte field of 7 bits instead of 16 bits, and a short addressing system that reduces 64-bit or 32-bit addresses to 6 bits where possible.

In addition, MIPI SPP v2.0 defines packetized JTAG messaging. This messaging reduces the overhead involved in using JTAG to change state. New opcodes provided in both FullSPP and TinySPP eliminate the need for "bit-banging,” or exchanging long series of ones and zeros, which achieves the efficiency needed for low-bandwidth interfaces. SPP v2.0 can also use a single command to set up a polling loop rather than going in and out of shift state, which makes it better suited to high-latency interfaces.

MIPI SPP v2.0 and the other debug specifications are available for public LINK  .

MIPI Alliance encourages interested companies to consider LINK  to reap the full membership benefits, which include access to relevant licenses, and opportunities to participate in development activities, interoperability workshops and other events.

To discover more about MIPI Alliance, subscribe to its blog and connect with its social networks by following MIPI on Twitter, LinkedIn and Facebook.

About MIPI Alliance

MIPI Alliance (MIPI) develops interface specifications for mobile and mobile-influenced industries. There is at least one MIPI specification in every smartphone manufactured today. Founded in 2003, the organization has over 300 member companies worldwide and 14 active working groups delivering specifications within the mobile ecosystem. Members of the organization include handset manufacturers, device OEMs, software providers, semiconductor companies, application processor developers, IP tool providers, test and test equipment companies, as well as camera, tablet and laptop manufacturers. For more information, please visit LINK  .

MIPI® and MIPI I3C® are registered trademarks owned by MIPI Alliance. MIPI GbD IPSSM, MIPI GbD USBSM, MIPI HTISM, MIPI NIDnTSM, MIPI PTISM, MIPI SPPSM, MIPI STPSM, MIPI SyS-TSM and MIPI TWPSM are service marks of MIPI Alliance.

More news and information about MIPI Alliance

Published By:

Business Wire: 14:01 GMT Wednesday 11th September 2019

Published: .

Search for other references to "mipi" on SPi News


Previous StoryNext Story

SPi News is published by Sector Publishing Intelligence Ltd.
© Sector Publishing Intelligence Ltd 2019. [Admin Only]
Sector Publishing Intelligence Ltd.
Agriculture House, Acland Road, DORCHESTER, Dorset DT1 1EF United Kingdom
Registered in England and Wales number 07519380.
Privacy Policy | Terms and Conditions | Contact Us